in order to use the full SDK provided by the BLE112 which is used to create the BLEBee you need to use BGLib.
Jeff Rowberg is providing an Arduino implementation of BGLib on github: https://github.com/jrowberg/bglib
The BLEBee v1.0.0 is not intended to be used as BGLib end device, but you can reflash the firmware by using the BGLib firmware for the BLE112. I have never tested it, but maybe you can do some pioneering.
What you will need as well is a TagConnect programming adapter and the AddOn-Board to connect the TagConnect to the CC-Debugger.
Otherwise this will not work. I can send you such an AddOn board and hint you which TagConnect you need to buy.