Author |
Message |
ronald.dlapka
Joined: Mon Mar 17, 2014 12:41 pm Posts: 4
|
Hello,
I currently work on a project using a FIOv3 and BLEBeev1.0.0 to transmit data of 10 sensors. Is it possible to create my own Profile with characteristics for each sensor ?
greets, Ronald
|
Mon Mar 24, 2014 4:16 pm |
|
 |
mkroll
Site Admin
Joined: Thu Aug 02, 2012 11:36 am Posts: 166
|
Hello Ronald, currently this is not supported for the BLEBee v1.0.0. Well it is, but you need to write your own firmware and reflash the BLEBee. This is a little difficult, since I'm using a TagConnect programming header to reduce space and cost.
If you know how to program for the BLE112 and you are familiar with the CC-Debugger, you need the TagConnect and an adapter I created. I can send you the latter, but you need to buy the TagConnect yourself.
Cheers, Michael.
|
Mon Mar 31, 2014 5:55 pm |
|
 |
ronald.dlapka
Joined: Mon Mar 17, 2014 12:41 pm Posts: 4
|
Hello, I don't know how to program a BLE112 yet. But I have a CC-Debugger and I'm willing to learn. =) The TagConnect is this "TC2030-MCP-NL 6-Pin No-Legs" ( http://www.tag-connect.com/TC2030-MCP-NL) isn't it ? What kind of adapter did you create? I'd be happy if you could send one to me. Big Thanks, Ronald
|
Mon Apr 07, 2014 1:11 pm |
|
 |
mkroll
Site Admin
Joined: Thu Aug 02, 2012 11:36 am Posts: 166
|
Hi, the one I'm using is the TC2030-IDC-NL
Cheers, Michael.
|
Sun Apr 13, 2014 12:15 pm |
|
 |
ronald.dlapka
Joined: Mon Mar 17, 2014 12:41 pm Posts: 4
|
Thanks, so this http://www.tag-connect.com/TC2030-IDC-NL or this http://www.tag-connect.com/TC2030-IDC-NL-10 would be fine? Can you send me this additional adapter ? Thanks, Ronald
|
Sun Apr 13, 2014 7:48 pm |
|
 |
jopiek
Joined: Sat Jun 22, 2013 10:43 pm Posts: 10
|
And I think this would work as an adapter: https://oshpark.com/profiles/digitalmisery
|
Fri May 02, 2014 10:38 pm |
|
 |
mkroll
Site Admin
Joined: Thu Aug 02, 2012 11:36 am Posts: 166
|
Hi, yes, correct. The TagConnect looks fine and the adapter will work as well. I will post my TagConnect Adapter at OSHPark as well as soon as I'm back from vacation which will be may 12th. I will write a blog post on what is necessary to program the BLEbee v1.0.0 using this setup.
Cheers, Michael.
|
Sat May 03, 2014 11:09 am |
|
 |
jopiek
Joined: Sat Jun 22, 2013 10:43 pm Posts: 10
|
Yesterday I got one from the debug store: http://www.thedebugstore.com/x-cart461/ ... Cable.htmlShipping from the US to EU is way to expensive and I often get a customs charge on top of it (unless I buy through mouser, they take care of that themselves).
|
Thu May 15, 2014 10:13 am |
|
 |
mkroll
Site Admin
Joined: Thu Aug 02, 2012 11:36 am Posts: 166
|
Hello, I think what you additionally need is the board in between to connect the TagConnect adapter to the CC-Debugger. I wrote a blogpost about this here: http://www.mkroll.mobi/?p=1639Best regards, Michael.
|
Wed Jul 09, 2014 10:17 am |
|
|