Dr. Michael Kroll's Mobile Computing Forum
http://forum.mkroll.mobi/

Supported board Arduino FIO
http://forum.mkroll.mobi/viewtopic.php?f=11&t=555
Page 1 of 1

Author:  mkroll [ Wed Jul 03, 2013 10:20 pm ]
Post subject:  Supported board Arduino FIO

Hello BLE users,

I have tested and uploaded a sketch for the Arduino Fio. The Original Arduino FIO is based on an Arduino ATmega328. Resulting a serial port debug connection using the Serial port will interfear somehow with the BLEbees RX/TX pins. You need to remove the BLEbee from the Arduino FIO while programming the sketch. It works best, when you run the Arduino FIO from a LIPO and transfer data over BLE to the Arduino Sketch. A sample sketch illustrating the use of the BLEbee with the Arduino FIO is also available from https://github.com/michaelkroll/BLEbee/ ... rduino_FIO.

Cheers,
Michael.

Attachments:
File comment: Arduino FIO
Screen Shot 2013-07-03 at 10.07.33 PM.png
Screen Shot 2013-07-03 at 10.07.33 PM.png [ 157.98 KiB | Viewed 72129 times ]

Page 1 of 1 All times are UTC + 1 hour [ DST ]
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/